Precautions for installation of gearbox
Improper selection of stepper motor reducer, insufficient motor torque or inertia of object motion exceeding the motor self-locking force, resulting in step loss or stepping loss. Improper selection of the driver and insufficient current of the matching driver have affected the normal operation of the motor. Many current falsely labeled drivers on the market now use peak current as the rated current to deceive consumers. The rated current of the driver selection should be 1.2-1.5 times greater than the rated current of the stepper motor reducer. Improper selection of matching power supply, the matching power supply should be 1.5-2 times the rated power supply of the driver, and the power supply virtual label is more serious than the driver virtual label. The control part should eliminate interference, stay away from the frequency converter, and prevent static electricity.
15
2024
/
09
Installation and daily maintenance of gear reduction motor
Gear reduction motors generally achieve the purpose of deceleration by meshing the input shaft of an electric motor, internal combustion engine, or other high-speed power through gears with fewer teeth on the output shaft of the gear reduction motor.
14
2024
/
09
Application reference for split/integrated reduction motor|Elevator
Customers tend to choose this configuration method for the purpose of protecting motors and reducers. When the belt slips, the motor current generally decreases. Because the motor spindle cannot output normal torque when slipping, the load is reduced and the current naturally decreases. At this point, the motor is only subjected to the friction of the motor bearings and the sliding belt, rather than the resistance of the load.
14
2024
/
09
The motor is right beside me What is an electric motor (commonly known as a motor)?
At present, motors have developed into a unique category of motors. With the production of new application scenarios and the research and development of new materials, it will continue to improve its own theory; Develop and research new varieties; Strengthen the close integration with high-tech and new technologies, and expand their functions; Improve the production technology of micro motors, enhance quality, and reduce costs.
13
2024
/
09
In summary, the number of poles of a motor determines its output power, rated speed, maximum speed, torque fluctuation, noise, and vibration characteristics. Motors with different numbers of poles are suitable for different application scenarios. Choosing the appropriate number of poles can improve the performance, efficiency, and service life of the motor. The above provides a detailed introduction to the meaning of motor pole numbers and the differences between different pole numbers, hoping to be helpful to you.
13
2024
/
09