What equipment needs to use aluminum alloy worm gear reducer?

What equipment needs to use aluminum alloy worm gear reducer?

The NMRV series aluminum alloy worm gear reducer is used as a mechanical reduction device for process equipment in many industries and fields such as metallurgy, mining, transportation, water conservancy, chemical industry, food, beverage, textile, tobacco, packaging, environmental protection, etc. It is highly praised by users and is currently the choice for modern industrial equipment to achieve high speed ratio, low noise, and high stability mechanical reduction transmission control devices.

1. The transmission is smooth, with low vibration, impact, and noise, a large reduction ratio, and wide versatility.

 

2. It can achieve a large transmission ratio through single-stage speed ratio transmission, with a compact structure. Most models of reducers have good self-locking properties, which can save braking devices for mechanical equipment with braking requirements.

 

The input forms of NMRV gearbox are divided into: hole input, shaft input, and extended worm shaft type; The output types of NRV reducers are divided into: hole output, one-way shaft output, and two-way shaft output.

 

Center distance of worm gear reducer: (mm) model NMRV/NRV025040005036307590110130150.

 

The speed ratios of aluminum alloy worm gear reducers are as follows: 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100.

 

UCAN NMRV Aluminum Alloy Worm Gear Reducer Product Features:

1. Compact structure, lightweight volume, small and efficient;

2. Good heat exchange performance and fast heat dissipation;

3. Easy to install, flexible and lightweight, superior performance, and easy to maintain and repair;

4. High rotational speed ratio, high torque, and high ability to withstand overload;

5. Smooth operation, low noise, and long-lasting durability;

6. Strong practicality, high safety and reliability.

 

Installation precautions:

1. The reducer must be installed under a flat and sturdy base, and the foot bolts must be sturdy and shock resistant.

2. The connecting shafts of the prime mover reducer working machine must be accurately aligned with each other after installation.

3. The tolerance dimensions of the outer diameter of the input and output shafts of the reducer shall be made according to h6. The inner holes of the matching transmission parts such as couplings, pulleys, sprockets, etc. shall be prepared according to appropriate tolerance dimensions to avoid damage to the bearings due to tight assembly and affect normal power transmission due to loose assembly.

 

Precautions for use:

1. Before use, pay attention to checking whether the reducer type structure, center distance specifications, transmission ratio, input shaft connection method, output shaft structure, input and output shaft direction, and rotation direction meet the requirements for use.

 

2. Multiple installation forms can be adopted according to actual requirements, and multiple surfaces can be installed;

 

3. The installation must be firm and reliable;

 

4. Regularly check the amount and quality of oil, retain sufficient lubricating oil, and promptly replace oil mixed with impurities or deteriorated.

 

5. If you have any questions during the selection or use process, you can directly contact our business personnel for professional technical services!

When installing transmission components such as sprockets and gears on the shaft extension, they should be placed as close to the bearing as possible to reduce bending stress on the shaft extension.

When assembling the reducer motor, butter should be applied to the inner hole wall and keyway of the worm head to avoid tight assembly and prevent the shaft hole from rusting over time.

When ordering and using various types of reducers, if the motor weight is too large, a support device should be installed.