The working principle, characteristics, advantages and disadvantages of the deceleration motor
Gearboxes are generally used for low-speed and high torque transmission equipment. They reduce the speed of electric motors, internal combustion engines, or other high-speed power by meshing the gears with fewer teeth on the input shaft of the gearbox with the large gears on the output shaft. Ordinary gearboxes also have several pairs of gears with the same principle to achieve the desired reduction effect. The ratio of the number of teeth between the large and small gears is the transmission ratio.
18
2024
/
09
Advantages and Applications of RV Gearbox Motor
Nowadays, the application of reducers in modern industry is becoming increasingly widespread. The motor of the RV reducer is an integrated machine consisting of a reducer and a motor. The application of gear reduction motors can improve production efficiency, with a higher degree of coordination between the motor and the reducer, a higher degree of gear meshing, and low noise from gear meshing! The service life of the deceleration motor has also become longer.
15
2024
/
09
Precautions for installation of gearbox
Improper selection of stepper motor reducer, insufficient motor torque or inertia of object motion exceeding the motor self-locking force, resulting in step loss or stepping loss. Improper selection of the driver and insufficient current of the matching driver have affected the normal operation of the motor. Many current falsely labeled drivers on the market now use peak current as the rated current to deceive consumers. The rated current of the driver selection should be 1.2-1.5 times greater than the rated current of the stepper motor reducer. Improper selection of matching power supply, the matching power supply should be 1.5-2 times the rated power supply of the driver, and the power supply virtual label is more serious than the driver virtual label. The control part should eliminate interference, stay away from the frequency converter, and prevent static electricity.
15
2024
/
09
Installation and daily maintenance of gear reduction motor
Gear reduction motors generally achieve the purpose of deceleration by meshing the input shaft of an electric motor, internal combustion engine, or other high-speed power through gears with fewer teeth on the output shaft of the gear reduction motor.
14
2024
/
09
Application reference for split/integrated reduction motor|Elevator
Customers tend to choose this configuration method for the purpose of protecting motors and reducers. When the belt slips, the motor current generally decreases. Because the motor spindle cannot output normal torque when slipping, the load is reduced and the current naturally decreases. At this point, the motor is only subjected to the friction of the motor bearings and the sliding belt, rather than the resistance of the load.
14
2024
/
09