The 3 main culprits for the shortened lifespan of planetary gearboxes
Why do others use the same planetary gearbox for 5 years, while yours is scrapped after 2 years?
26
2025
/
05
Types, advantages and disadvantages of mixing reducers,
Gearbox for planetary mixers: Generally driven by a reducer, it is suitable for industries such as food and pharmaceuticals that require high mixing uniformity, and can achieve a three-dimensional mixing effect. The advantages are efficient mixing, fast stirring, and simple operation; The disadvantage is that the equipment cost is relatively high and the unloading speed may be slow.
26
2025
/
05
A brief explanation of stepper motors, you will understand after reading it stepping motor
A stepper motor is an electromechanical device that directly converts electrical pulses into mechanical motion. By controlling the sequence, frequency, and quantity of electrical pulses applied to the motor coils, the steering, speed, and rotation angle of the stepper motor can be controlled. Without relying on a closed-loop feedback control system with position sensing, a simple and low-cost open-loop control system composed of a stepper motor and its accompanying driver can achieve precise position and speed control.
24
2025
/
05
The classification system of stepper motors is based on the phase number architecture, and currently the mainstream market is focused on two-phase and five phase models. The traditional two camera model can achieve a subdivision of 400 steps per revolution, while the five camera model can achieve a subdivision accuracy of up to 1000 steps per revolution through multi-phase winding control. Compared to two-phase products, the five phase model performs better in dynamic response speed and torque fluctuation suppression, with an acceleration characteristic improvement of about 30% and a mechanical vibration amplitude reduction of over 20%.
24
2025
/
05
Multiple fault analysis and solutions for reducers
A reducer is a power transmission mechanism that uses a gear speed converter to reduce the number of rotations of a motor to the desired number and obtain a larger torque.
23
2025
/
05